 |
| |
 |
 |
| |
 |
charge a 12-volt battery system (1 or 2 banks) from a 110 or 220VAC
source. The batteries must share a common ground. This all new single
board design incorporates state of the art switchmode technology for
unmatched efficiency and ultra-quite operation. Multiple stages of filtering
reduce radiated or conducted noise to very low levels. Extra features
include adjustable output voltage, audible and visual indicators for low
input voltage, low output voltage, over temperature and an equalize
charging cycle. Safety features include reverse input protection,
over-temperature shutdown, current limiting, short circuit protection with
automatic recovery, input undervoltage shutdown, reverse battery hook-up
protection, a dry contact alarm relay output and an output overvoltage
crowbar. Optional features include a Digital Volt/Ammeter, 3-bank
Charging, a Remote Control Panel, and/or a second Battery Temperature
Sensor. We are confident that you will get many years of reliable service
from this AC Battery Charger.
charge a 12 Volt battery system (1 or 2 banks) from a 110 or 220VAC
source. The batteries must share a common ground. This all-new single
board design incorporates state of the art switchmode technology for
unmatched efficiency and ultra-quite operation. Multiple stages of
filtering reduce radiated or conducted noise to very low levels. Extra
features include adjustable output voltage, audible and visual indicators
for low input voltage, low output voltage, over temperature and an
equalize charging cycle. Safety features include both charger and
battery over-temperature shutdown, current limiting, short circuit
protection with automatic recovery, input undervoltage shutdown,
reverse battery hook-up protection, a dry contact alarm relay output
and output overvoltage crowbar. Optional features include a Digital
Volt/Ammeter, 3-Bank Charging, a Remote Control Panel, and/or a
second Battery Temperature Sensor. We are confident that you will get
many years of reliable service from this AC Battery Charger.
Volts DC at 1000 Watts of continuous power from a 110 or 220 Volt
AC source. Analytic Systems' power supplies use Switchmode
technology with powerful IGBT switching transistors for reliability and
efficiency with minimum size. Circuit innovations reduce output ripple
to levels previously available only from bulky and inefficient linear
power supplies. Reliability features include an input fuse, thermal
shutdown, current limiting and output short circuit protection with
automatic recovery. An output over voltage crowbar circuit protects
any powered devices from excessive voltage in the event of a failure
of the unit.
The newly updated single-board PWS1000 is ultra-quiet and features
the latest generation of current mode PWM control. Extra features
include adjustable output voltage audible and visual indicators for low
input voltage, low output voltage, over temperature, overload and
output on. Either 110 or 220 VAC input (field convertible) is available.
The PWS1000 also features a four contact output terminal (two
positive and two negative contacts) for easy connection of devices to
the supply. Optional features include a Remote Control, a 19" Rack
Mount version, and/or a Digital Volt Ammeter to allow monitoring of
output current and output voltage.